VP4MX wheel spacers increase the UTV’s track width, improve lateral stability and give the vehicle a wider, more aggressive stance.

The wheel spacers are CNC-machined and supplied with steel mounting nuts manufactured by VP4MX. The nuts feature a longer tapered seating surface than standard nuts, providing a larger contact area for secure fastening and accurate centering.

Technical specifications:

• Bolt pattern: 5×114.3 mm
• Bolt thread: M12×1.25
• Bolts and nuts: Zinc-plated
• Outer diameter: 148 mm
• Center bore: 74 mm
• Package includes: 2 wheel spacers (1 pair)
• Recommended nut tightening torque: 100 Nm

Note: Two sets are required to install wheel spacers on both axles.

Important: Check all dimensions and fitment before ordering.

Designed and manufactured in Estonia.

Video of installing wheel spacers:

VP4MX wheel spacers increase the ATV’s track width, improve lateral stability and give the vehicle a wider, more aggressive stance.

The wheel spacers are CNC-machined and supplied with steel mounting nuts manufactured by VP4MX. The nuts feature a longer tapered seating surface than standard nuts, providing a larger contact area for secure fastening and accurate centering.

Technical specifications:

• Bolt pattern: 4×110 mm
• Bolt thread: M12×1.25
• Bolts and nuts: Zinc-plated
• Outer diameter: 144 mm
• Center bore: 74 mm
• Package includes: 2 wheel spacers (1 pair)
• Recommended nut tightening torque: 100 Nm

Note: Two sets are required to install wheel spacers on both axles.

Important: Check all dimensions and fitment before ordering.

Designed and manufactured in Estonia.

Video of installing wheel spacers:

The anchor creates a threaded mounting point on the ATV rack for attaching various accessories or a cargo tie-down eye.

IMPORTANT! Upmoto plastic racks use two different mounting opening lengths: 46 mm and 50 mm. Measure the length of the opening on your ATV before ordering and select the correct anchor version.

Materials:
• 3D-printed ABS
• Zinc-plated steel bolts and nuts

Installation:
1. Remove the base plate from the anchor.
2. Insert the anchor into the rack opening.
3. Refit the base plate from underneath using the supplied M5 bolts.
4. Recommended tightening torque: 1.5–2 Nm.

Do not overtighten the bolts.

WARNING!  3D-printed ABS anchor is not as strong as an aluminium mounting anchor. Do not use it for mounting heavy or safety-critical accessories.

The 3D-printed anchor may break if overloaded.

Designed and manufactured in Estonia.

The roller fairlead is designed primarily for ATV snowplow use. With a standard fairlead, the winch rope runs downward from the fairlead at a very steep angle when operating a snowplow. This increases friction and rope wear and may cause premature failure of the winch rope.

The added roller guides the winch rope downward more smoothly and reduces the sharp bend angle of the rope. This helps reduce winch rope wear during repeated lifting and lowering of the snowplow.

The roller assembly is removable. When the snowplow is not in use, the roller assembly, secured with four bolts, can be removed and the fairlead can be used as a standard winch fairlead.

One fairlead, two ways to use it.

Features:

• reduces the winch rope bend angle when using a snowplow
• helps reduce wear on synthetic winch rope
• removable roller
• can be used as a standard fairlead after removing the roller
• fairlead mounting hole spacing 124 mm
• includes screws for closing the unused mounting holes

Materials:

Fairlead and roller brackets: AW6082 aluminium
Roller: PE300 plastic
Bolts and screws: zinc plated steel

Recommended tightening torque for the fairlead mounting bolts is 8–10 Nm. Do not overtighten.

If the roller is not used for an extended period, it is recommended to install the supplied screws in the roller bracket mounting holes to prevent dirt from entering the threaded holes. Recommended tightening torque for these screws is 2 Nm. Do not overtighten.

Designed and manufactured in Estonia.

Suitable for all Segway ATVs that have anchor holes in  plastic luggage rack.

Creates a threaded hole on the ATV luggage rack where you can attach various accessories or a load securing eyelet.

Material: 3D printed ABS, bolts and nuts galvanized steel

To install, unscrew the base plate from the anchor. Install the anchor in the CFConnect hole and then secure the base plate from below with the M5 mounting bolts included in the kit. The optimal tightening torque for the bolts is approx. 1.5-2 Nm. Do not overtighten!

Warning!!! 3D printed anchor is not as strong as aluminum anchor. Do not use 3D printed anchors to attach heavy or critical accessories!!!

3D printed anchor may break under excessive load!!!

Designed and manufactured in Estonia

Fits all Segway ATVs with anchor holes in plastic luggage rack

Creates a threaded hole on the ATV luggage rack where you can attach various accessories or a load securing eyelet for creating tie down anchor point.

Material – aluminum, bolts galvanized

To install, turn the eccentric nuts away from the mounting anchor so that there is a gap of about 4-5mm between the nuts and the anchor

Rotate the eccentric nuts under the anchor and place the anchor to cargo rack accessory hole.

When tightening the bolts, the eccentric nuts are rotating themselves from under the anchor and the fixing anchor into place. The optimal tightening torque for the bolts is approximately 2.5-3 Nm. Do not overtighten!

To remove the anchors, unscrew the mounting bolts 3-4 turns counterclockwise. The eccentric nuts will rotate themselves under the anchor and you can pull the anchor out of the hole.

Designed and manufactured in Estonia

Fits all CFMOTO and GOES ATVs with CF connect holes in the luggage rack

Creates a threaded hole on the ATV luggage rack where you can attach various accessories or a load securing eyelet for creating tie down anchor point.

Material – aluminum, bolts galvanized

To install, turn the eccentric nuts away from the mounting anchor so that there is a gap of about 4-5mm between the nuts and the anchor

Rotate the eccentric nuts under the anchor and place the anchor to cargo rack CF connect hole.

When tightening the bolts, the eccentric nuts are rotating themselves from under the anchor and the fixing anchor into place. The optimal tightening torque for the bolts is approximately 2.5-3 Nm. Do not overtighten!

To remove the anchors, unscrew the mounting bolts 3-4 turns counterclockwise. The eccentric nuts will rotate themselves under the anchor and you can pull the anchor out of the hole.

Designed and manufactured in Estonia

The tie-down anchors are made of high-quality plastic, which is lightweight, rust-resistant and designed to withstand heavy use in the forest, at work and in leisure time.

The anchor forms a stable threaded attachment point where you can securely attach cargo straps, nets or other equipment with various bolts.

Features:

• Suitable for all CFMOTO and GOES ATVs that have CF connect adapter holes in the metal cargo rack.
• Made of durable PE plastic
• Lightweight and corrosion-resistant
• Easy and secure installation
• Ideal for work, hiking and off-road use

VP4MX tie-down anchors are a reliable choice for every ATV user who needs a solid and professional solution for securely securing loads.

Material: Anchor body PE plastic, fasteners galvanized steel.

Designed and manufactured in Estonia

keywords: cfmoto goes c4 c5 terrox 450 520 550 520L 550L

The tie-down anchors are made of high-quality aluminum, which is lightweight, rust-resistant and designed to withstand heavy use in the forest, at work and in leisure time.

The anchor forms a stable threaded attachment point where you can securely attach cargo straps, nets or other equipment with various bolts.

Features:

• Suitable for all CFMOTO and GOES ATVs that have CF connect adapter holes in the metal cargo rack.
• Made of durable aluminum
• Lightweight and corrosion-resistant
• Easy and secure installation
• Ideal for work, hiking and off-road use

VP4MX tie-down anchors are a reliable choice for every ATV user who needs a solid and professional solution for securely securing loads.

Material: Anchor body aluminum, fasteners galvanized steel.

Designed and manufactured in Estonia

keywords: cfmoto goes c4 c5 terrox 450 520 550 520L 550L

Fits to:

Cobra:

CX 65 2018 →

Material: aluminum alloy AW7075-T6 (Ergal)

Chain pitch 420

NB! The product photo is illustrative and may differ from the actual appearance of the product.

Check the suitability of the product measurements before ordering!

Designed and manufactured in Estonia by VP4MX

Keywords: mx motokross motocross cobramoto enduro 2028 2027 2026 2025 2024 2023 2022 2021 2020 2019 2018